Logan Chassis - Revision history

Jane at 21:55, 23 February 2016

2016-02-23T21:55:24Z

← Older revision		Revision as of 21:55, 23 February 2016
Line 13:		Line 13:
	The Logan Chassis was overall predicted to be overweight due to the numerous amount of 80/20 required to just build the drivetrain. Though actuality proved otherwise with the chassis weighing close to the [[Tanner Chassis]].		The Logan Chassis was overall predicted to be overweight due to the numerous amount of 80/20 required to just build the drivetrain. Though actuality proved otherwise with the chassis weighing close to the [[Tanner Chassis]].

	[[File:loganchassis2.jpg \| right \| ~~200px~~ \| thumb \| Logan Chassis pt. 2]]		[[File:loganchassis2.jpg \| right \| 250px \| thumb \| Logan Chassis pt. 2]]

	===Wheels===		===Wheels===

Jane: /* Mechanics */

2016-02-23T21:53:29Z

Mechanics

← Older revision		Revision as of 21:53, 23 February 2016
Line 12:		Line 12:
	==Mechanics==		==Mechanics==
	The Logan Chassis was overall predicted to be overweight due to the numerous amount of 80/20 required to just build the drivetrain. Though actuality proved otherwise with the chassis weighing close to the [[Tanner Chassis]].		The Logan Chassis was overall predicted to be overweight due to the numerous amount of 80/20 required to just build the drivetrain. Though actuality proved otherwise with the chassis weighing close to the [[Tanner Chassis]].

			[[File:loganchassis2.jpg \| right \| 200px \| thumb \| Logan Chassis pt. 2]]

	===Wheels===		===Wheels===

Jane at 17:18, 18 February 2016

2016-02-18T17:18:15Z

← Older revision		Revision as of 17:18, 18 February 2016
Line 14:		Line 14:

	===Wheels===		===Wheels===
	[[Logan Su]] arranged the wheels in such a way that there would always be one touching the bump as it climbed and went over the bump. The designed called for eight plaction wheels from [[AndyMark]]. The inner two wheels were six inches in diameter while the two outer raised wheels were four inches in diameter.{{citation needed}}		[[Logan Su]] arranged the wheels in such a way that there would always be one touching the bump as it climbed and went over the bump. The designed called for eight plaction wheels from AndyMark. The inner two wheels were six inches in diameter while the two outer raised wheels were four inches in diameter.{{citation needed}}

	==Control==		==Control==

Jane at 17:13, 30 December 2015

2015-12-30T17:13:20Z

← Older revision		Revision as of 17:13, 30 December 2015
Line 1:		Line 1:
	~~{{stub}}~~

	{{RobotInfoBox		{{RobotInfoBox
	\|Name=Logan Chassis		\|Name=Logan Chassis

Tanner: Add frc robot bar.

2010-05-01T00:41:07Z

Add frc robot bar.

← Older revision		Revision as of 00:41, 1 May 2010
Line 29:		Line 29:
	==Programming==		==Programming==
	Programming was mainly done by [[Tanner Smith]] and a few changes by [[David Cox]].		Programming was mainly done by [[Tanner Smith]] and a few changes by [[David Cox]].

			{{FRCRobotBar}}

	[[Category:Robots]]		[[Category:Robots]]

Tanner: Update to new RobotInfoBox.

2010-04-28T11:38:59Z

Update to new RobotInfoBox.

← Older revision		Revision as of 11:38, 28 April 2010
Line 1:		Line 1:
	{{stub}}		{{stub}}

			{{RobotInfoBox
			\|Name=Logan Chassis
			\|Image=LoganChassis.jpg
			\|Year=2010
			\|Competition=FRC
			}}

	The Logan Chassis was a tank style drivetrain that was built in the beginning of the season of [[2010]].		The Logan Chassis was a tank style drivetrain that was built in the beginning of the season of [[2010]].

	The design proved to be a innovative idea, but the overall stability of the robot as it climbed and went over the bump proved to be too unstable to do it without assistance or a dead weight.		The design proved to be a innovative idea, but the overall stability of the robot as it climbed and went over the bump proved to be too unstable to do it without assistance or a dead weight.

	~~[[Image:LoganChassis.jpg \| thumb \| 300px \| Picture of the Logan Chassis during build.]]~~

	*Year Built In: [[robot for year::2010]]
	*Competition Built For: [[robot for competition::FRC\|FIRST Robotics Competition]]

	==Mechanics==		==Mechanics==

Tanner: Initial page.

2010-03-17T23:53:42Z

Initial page.

← Older revision		Revision as of 23:53, 17 March 2010
Line 1:		Line 1:
	{{stub}}		{{stub}}

	~~''Short description~~ of the ~~robot - perhaps who designed it~~.''		The Logan Chassis was a tank style drivetrain that was built in the beginning of the season of [[2010]].

	[[Image:~~RobotPicture~~.jpg \| thumb \| 300px \| Picture of the ~~robot~~.]]		The design proved to be a innovative idea, but the overall stability of the robot as it climbed and went over the bump proved to be too unstable to do it without assistance or a dead weight.

			[[Image:LoganChassis.jpg \| thumb \| 300px \| Picture of the Logan Chassis during build.]]

	*Year Built In: [[robot for year::2010]]		*Year Built In: [[robot for year::2010]]
Line 9:		Line 11:

	==Mechanics==		==Mechanics==
	~~''Any information on~~ the ~~mechanical~~ with ~~sub-headings~~ for ~~sub-components~~.''		The Logan Chassis was overall predicted to be overweight due to the numerous amount of 80/20 required to just build the drivetrain. Though actuality proved otherwise with the chassis weighing close to the [[Tanner Chassis]].

			===Wheels===
			[[Logan Su]] arranged the wheels in such a way that there would always be one touching the bump as it climbed and went over the bump. The designed called for eight plaction wheels from [[AndyMark]]. The inner two wheels were six inches in diameter while the two outer raised wheels were four inches in diameter.{{citation needed}}

	==Control==		==Control==
	~~''Short description on how the robot~~ was controlled.''		The Logan Chassis was controlled via one XBox 360 controller.

	===Driving===		===Driving===
	~~''Description~~ on ~~how exactly~~ the driving was ~~done~~.''		Driving was done on one XBox 360 controller. Initially the driving was tank drive using both of the small joysticks, but was later converted to a arcade drive of sorts with the Y axis on the left joystick and the X axis on the right joystick.

	===Manipulation===		===Manipulation===
	~~''Description on how exactly~~ the ~~manipulating~~ was ~~done~~.''		Any manipulation components never made it to the robot, so there was no need for any controls.

	==Programming==		==Programming==
	~~''Description on how programming~~ was done ~~or laid out~~.''		Programming was mainly done by [[Tanner Smith]] and a few changes by [[David Cox]].

	[[Category:Robots]]		[[Category:Robots]]

Tanner: Save for premise.

2010-03-17T23:39:58Z

Save for premise.

New page

{{stub}}

''Short description of the robot - perhaps who designed it.''

[[Image:RobotPicture.jpg | thumb | 300px | Picture of the robot.]]

*Year Built In: [[robot for year::2010]]
*Competition Built For: [[robot for competition::FRC|FIRST Robotics Competition]]

==Mechanics==
''Any information on the mechanical with sub-headings for sub-components.''

==Control==
''Short description on how the robot was controlled.''
===Driving===
''Description on how exactly the driving was done.''
===Manipulation===
''Description on how exactly the manipulating was done.''

==Programming==
''Description on how programming was done or laid out.''

[[Category:Robots]]